Mail Delivery Subsystem Emails: What They Mean and What to Do

bouncesMail Delivery Subsystem Emails: What They Mean and What to Do

"Mail Delivery Subsystem" is the sender name on an automated bounce notice. When you get an email from Mail Delivery Subsystem (in Gmail, the address is mailer-daemon@googlemail.com), a mail system is telling you that a message couldn't be delivered. It's usually harmless to your account. A notice for mail you never sent is a different case, covered below.

You may also see these notices called returned mail, message undeliverable or undeliverable email. This guide is for anyone who sends email, and especially for people who send campaigns and see these notices arrive by the dozen.

Short answer

  1. Open the notice and find the address that failed and the reason given.
  2. Check that you actually sent the message. If you didn't, see the scam and backscatter sections below.
  3. Decide whether the problem is temporary or permanent.
  4. Fix the address or remove it. Correct visible typos; stop sending to addresses that don't exist.
  5. Verify your list before the next send, so fewer of these notices come back.

What is Mail Delivery Subsystem?

Mail Delivery Subsystem isn't a person or a company. It's the name a mail system uses when it sends you an automatic report about a message that failed. The report is a delivery status notification, a standard format defined in RFC 3464.

Gmail uses the name "Mail Delivery Subsystem". Other providers often use names such as Mail Delivery System, Mailer-Daemon or Postmaster for the same kind of notice. The wording varies by provider, but the message is the same: something you sent didn't arrive.

What the Gmail notice says

In Gmail, the notice comes from Mail Delivery Subsystem (mailer-daemon@googlemail.com), and the subject is often "Delivery Status Notification (Failure)" (Google, checked November 2026). The reason for the failure is inside the message, so open it and look for the failed address and the explanation next to it.

Google lists these common causes of a Mail Delivery Subsystem failure (Google, checked November 2026):

  • The address doesn't exist, or it has a typo, such as a misspelling, stray quotation marks or spaces.
  • The message was flagged as spam or temporarily rejected.
  • You reached your sending limit. Google says this is temporary; its Help page lists the current limits for personal Gmail accounts.
  • The recipient's server is busy or offline.
  • The recipient's storage is full.
  • An invalid HELO/EHLO from devices such as printers, scanners or fax machines that send email.

Google's wording and limits can change, so check its Help page if a notice doesn't match this list. For bad addresses specifically, see why invalid email addresses end up on your list and how to remove them.

Is a Mail Delivery Subsystem email a scam?

Usually not, but it can be. A Mail Delivery Subsystem email falls into one of three cases:

  • A real bounce for something you sent. This is the most common case. The notice quotes or refers to your own message.
  • Backscatter. A spammer forged your address as the sender, the receiving server rejected the message, and the bounce came back to you. Our guide to bounce backs for email you didn't send covers this in more detail.
  • A phishing lookalike. A fake notice made to look like a bounce. Cybernews notes that fake notices often include links to "view" or "fix" the message, and advises against clicking or replying.

To check an email from Mail Delivery Subsystem:

  • Did you send the message it refers to? Look for it in your Sent folder.
  • Do the subject and the quoted message match what you actually sent?
  • Don't click links or reply, and don't open attachments in a notice you're unsure about.

This is general guidance, not security advice. If a notice asks you to sign in, pay or download something, treat it with suspicion.

Why do I keep getting notices for mail I didn't send?

If you keep getting Mail Delivery Subsystem emails for messages you never wrote, it's typically backscatter: someone is sending spam with your address in the From line, and the bounces land in your inbox. On its own, that doesn't mean your account was hacked.

What you can do:

  • Don't reply to the notices.
  • Filter them if they keep coming.
  • If you own the domain, set up SPF, DKIM and DMARC so receiving servers can reject forged mail. Check your setup with the free domain health check.

The backscatter section of our bounce codes guide has the rest of the steps.

For senders: temporary or permanent?

If you send campaigns, the question that matters is whether to retry, remove the address or look at your own setup. Here's how the common notices usually break down:

Notice says What it usually means What you do
Address doesn't exist Usually permanent Fix it if it's a typo; otherwise remove it
Mailbox full, or server busy Usually temporary Let your sending tool retry a limited number of times; remove the address if it keeps failing
Blocked, or flagged as spam Usually about your reputation or content, not the address Don't remove the recipient yet; investigate your sending setup
Sending limit reached Usually temporary Wait, then split large sends into smaller batches
"Delay" in the subject The server is usually still trying to deliver Wait; a failure notice follows if it gives up

For the codes behind these notices (such as 550 5.1.1 or 5.7.1) and how to handle each one, see our SMTP bounce codes reference.

How to stop Mail Delivery Subsystem emails from your campaigns

You can't make every bounce disappear, but you can make them rare:

  1. Remove hard bounces after the first one. An address that doesn't exist won't start working.
  2. Fix typos you can see, like gmial.com instead of gmail.com, and confirm with the contact where you can.
  3. Verify new and old addresses before you send. Addresses that were fine last quarter can bounce today. Check single addresses in the free email verifier, and follow our guide on how to clean your email list for whole lists.
  4. Watch your bounce rate. Our guide to email bounce rates shows how to calculate it and what counts as a good number.

Verify an email free: 5 free checks an hour, no signup.

Check it works

After you clean the list, send to a small segment first. You should see fewer bounce notices than before. Check your sending platform's bounce report rather than your inbox, since most campaign tools collect bounces there, and compare it with your last send.

Troubleshooting

The notice gives no reason. Some notices are short. Look for a code line further down the message, or check the bounce report in your sending tool, which often shows the reason per address.

The same address bounces after you fixed it. Check the spelling again character by character, including spaces and quotation marks. If it still bounces with "address doesn't exist", remove it.

Bounces only come from one provider. If valid addresses at one provider keep bouncing with block or spam messages, the problem is more likely your reputation or authentication than your list. Run a domain health check and see the block codes in our bounce codes guide.

The notice is for a message you didn't send. That's backscatter or a fake notice. Don't reply or click anything; see the sections above.

Next step

A Mail Delivery Subsystem email tells you which address failed and why. Fix or remove that address, then check the rest of your list before the next send so fewer notices come back.

Verify an email free with 5 free checks an hour, no signup. To clean a whole list, create a free account and get 200 free validations, no credit card required. After that, pricing is pay-as-you-go from $6 for 2,500 emails.

Join 1,000+ CompaniesImproving Email Deliverability

Start with 200 free validations. Upgrade only when you're ready.

No credit card required • Cancel anytime